Showing 305–320 of 345 results
Finish: galvanised and painted in our colours.
Three dimensions: 1000, 1300 or 1500 mm.
Installation: directly on the ground or preferably on support frame.
Option: galvanised support frame with holes to anchor them into concrete. The tree grille rests on the full perimeter of the support frame. Support frame strongly recommended.
Structure: steel, lacquered in black, with grille for extinguishing cigarettes.
Emptying: through front door, locked with cylinder key.
Capacity: 3 litres.
Dimensions: 250 mm wide x 350 mm high x 85 mm depth.
Sold in batches of 4 units.
Generally dispatched in 48 hours.
Installation: galvanised steel brackets for walls, round posts (ø 76 to 90 mm) and rectangular posts (60 x 80 mm or 80 x 80 mm). Important: Our Anti-frost Stainless Steel mirrors may only be installed on steel posts.
Black gasket: mirrors are surrounded by a PVC gasket with a metal frame that resists tough outdoor conditions.
Stainless Steel Quality: the unbreakable, UV-resistant stainless-steel mirror surface ensures a long life span, with a precision polish for unparalleled image quality.
Stainless Steel & anti-frost/anti-condensation Quality: the stainless-steel mirror surface is equipped with an exclusive defogging and defrosting system that requires no electrical wiring. The mirror equipped with a system which requires exposure to the sun, its operation will not be optimal if it is installed against a wall or if it is constantly in a shaded area.
Accessories: posts available for all models. Contact us.
Finish: galvanised steel.
Length: 1800 mm.
Height: 116 mm.
Structure: ø 76 mm steel tube, galvanised or paint over galvanised steel in our colours.
Installation: on base plates, anchors included.
Height above ground: 1000 mm.
Steel tube: ø 76 mm.
Finish: zinc primed and painted in RAL 9010, with 3 red reflective strips for increased safety at night.
Installation: concreted directly into ground (concrete depth 180 mm) or using a socket for removable bollards.
Removability kit available.
Length: 2000 mm.
Passage width: 1600 mm.
Structure: steel tube, ø 60 mm.
Opening system: pivot-mounted shaft.
Locking: with ø 20 mm pin and padlock (included). Can be locked at 90° in open position.
Finish: galvanised steel or paint over galvanised steel in our colours.
Installation: on 200 x 200 mm base plate with concreted anchor rods (included).
Width: 625 mm.
Total height:
Structure: steel tube, ø 60 mm.
Finish: galvanised & painted in our RAL colours.
Installation: concreted directly into ground or base plates; sockets available as options.
Width: 625 mm.
Total height:
Structure: steel tube, ø 60 mm.
Finish: galvanised.
Installation: concreted directly into ground or base plates; sockets available as options.
Width: 300 mm.
Total height:
Structure: steel tube, ø 50 mm.
Finish: galvanised or galvanised & painted in our RAL colours.
Installation: concreted directly into ground or base plates.
Structure: 80 x 80 mm aluminium bar extended with 70 x 70 mm aluminium bar.
Width: adjusts from 3200 to 6550 mm (distance between the axis of rotation and the end of the barrier) for a post-to-post width of 3050 to 6400 mm.
Opening system: rotation on stainless-steel axis on ball bearings. Counterweight must be integrated into a box attached to one end of the bar.
Locking: in raised position (on main post) or lowered position (on tip support post) with pin and padlock, included. Delivered with tip support post (steel).
Finish: painted white with red reflective strips (contact us for other colour options such as yellow and black).
Installation: on base plates with mounting hardware included.
Structure: 80 x 80 mm aluminium tube extended by a 70 x 70 mm aluminium tube.
Width: adjusts from 3000 to 4000 mm (distance between axis of rotation and the tip of the barrier).
Operating mechanism: integrated gas cylinder to compensate the weight of the boom and facilitate its use. Rotation on a stainless-steel axel. Automatic locking.
Locking options: key padlock or triangle key padlock . Height adjustable pendulum support arm (+/-100 mm).
Finish: lacquered white steel with red reflective strips. Pendulum support arm finished in RAL 3020.
Installation: on base plates with stencil and ground hooks included.
Height above ground: from 2.2 to 4.5 m.
Structure: steel tubes, 80 x 80 mm or 120 x 120 mm.
Finish: lacquered in white over galvanised steel with red reflective strips (contact us for other colour options such as yellow and black).
Installation: on base plates with stencil and ground hooks included in the pre-installation kit.
Optional: height gauge rail.
Structure: steel tubes, 70 x 40 mm and 60 x 30 mm.
Width: adjustable from 3000 to 4750 mm, locked with screws.
Locking: with padlock (included). Second post included for locking in open position.
Finish: lacquered white over galvanised steel with red reflective strips (contact us for other colour options such as yellow and black).
Installation: on base plates with mounting brackets (included).
Access height: from 1.9 to 4 m.
Width: from 5 to 12 m.
Structure: steel tubes, 120 x 120 mm and 80 x 80 mm. Equipped with single or double tension cable.
Locking: with stainless steel pins. Pin locked with padlock (included) or 11 mm triangle-key lock (factory fitted).
Finish: lacquered in white over galvanised steel with red reflective strips (contact us for other colour options such as yellow and black).
Installation: on base plates with stencil and ground hooks included in the pre-installation kit.
Levelling: with locknuts placed under the base plates.
Optional: height gauge rail.
